TABLE OF CONTENTS
WARNING DECAL PLACEMENT ............................................................. 3
IMPORTANT PRECAUTIONS ................................................................ 4
BEFORE YOU BEGIN ...................................................................... 5
ASSEMBLY ............................................................................... 6
ADJUSTMENTS .......................................................................... 16
CONSOLE OPERATION .................................................................... 20
TROUBLESHOOTING ..................................................................... 22
EXERCISE GUIDELINES .................................................................. 23
ORDERING REPLACEMENT PARTS .................................................. Back Cover
LIMITED WARRANTY .............................................................. Back Cover
Note: A PART IDENTIFICATION CHART and a PART LIST/EXPLODED DRAWING are attached in the center of
this manual. Remove the PART IDENTIFICATION CHART and PART LIST/EXPLODED DRAWING before begin-
ning assembly.
WELDER is a registered trademark of ICON IF', Inc.
2
To Next Page
Loading...
Need help?
General