Do you have a question about the Weider Pro 3770 WESY37531 and is the answer not in the manual?
Assemble the base and uprights that form the skeleton of the weight system.
Assemble the arms and leg levers.
Attach the cables and pulleys connecting arms to weights.
Assemble the seats and backrest.
Instructions on how to change the weight setting of the weight stack.
How to attach the lat bar or ab strap to the high pulley station.
How to attach the lat bar, ab strap, or nylon strap to the low pulley station.
How to attach the ab strap to the ab pulley station.
Instructions for adjusting the backrest position on the weight system.
Instructions for adjusting the curl pad on the weight system.
Instructions on how to tighten the cables on the weight system.
Diagram showing the proper routing for the Leg Press Cable (75).
Diagram showing the proper routing for the Ab Cable (47).
Diagram showing the proper routing for the Butterfly Cable (73).
Diagram showing the proper routing for the Weight Cable (72).