Operating instructions, Piercing press, Weidmann Type MV5 Version: May 2019 Page 9
Disposal
This operation may be undertaken by: third parties; mechanics; transportation providers, disposal specialists
The following procedure must be used for disposal of the equipment:
Remove oil and grease
Dismantle plastic components and dispose of them correctly
Dispose of metal components correctly
***************************************************************************************************************************
CE Conformity Declaration
We hereby declare that we may not attach any CE label to our piercing presses, since these presses are
operated solely by human effort and do not include any lifting procedures. As a result, they do not fall within
the scope of EU Machinery Directive 2006/42/EC.
Extract from EU Machinery Directive 2006/42/EC
Within the meaning of Article 1 of the Machinery Directive, machines must, according to Article 2 of the
Machinery Directive, exhibit one of the following characteristics in respect of their drive systems:
an assembly, fitted with or intended to be fitted with a drive system other than directly applied human
or animal effort, consisting of linked parts or components, at least one of which moves, and which
are joined together for a specific application
an assembly of linked parts or components, at least one of which moves and which are joined
together, intended for lifting loads and whose only power source is directly applied human effort.
To Next Page
Loading...