74
June, 2016
DAILY CHECKLIST
ENSURE THE MACHINE HAS BEEN LOCKED OUT / TAGGED OUT AND THAT ALL COMPONENTS ARE COOL TO THE
TOUCH BEFORE PERFORMING MAINTENANCE ON PARTS.
Check all suction cups for damage
and check for proper functionality.
Clear any debris from the suction
cups and carefully clean them with
a damp cloth.
Check if the Film Rollers move
freely.
Machine must be powered on for
this test, power it off and Lock
Out when the test is complete:
Test the safety switches by
opening the doors and checking if
the machine stops.
Test the Emergency Stop button.
Machine must be powered on for
this test, power it off and Lock
Out when the test is complete:
Inspect and drain air reservoir tank
to eliminate water build up.