WEIHONG NK105 G3F - Page 16

Specialized Concentrated Focused
「4」Summarization
Key icon
Key name
Function
Y+
Positive movement of Y axis; input of number 8; switching
between MCS and WCS with the help of the auxiliary key
Z/A+
Positive movement of Z/A axis; input of number 9
X-
Negative movement of X axis; input of number 4; homing all
the axes with the help of the auxiliary key
(0,0)
Spindle ON/
OFF
Start or stop of spindle under manual mode; input of number
5; backing to workpiece origin with the help of the auxiliary
key
X+
Positive movement of X axis; input of number 6
Override-
Decrease of feedrate override; input of number 1; decrease
of spindle gear with the help of the auxiliary key when the
spindle port has input
Y-
Negative movement of Y axis; input of number 2
Z/A-
Negative movement of Z/A axis; input of number 3
0
Speed
switchover
Switching between jog/rapid jog speed in jog mode; input of
number 0; tool measurement with the help of auxiliary key
Clearing
XY clearing; input of minus; Z/A clearing with the help of
auxiliary key
Menu
Entering menu page; input of decimal point; entering image
update page at the time of system start-up
Start
Start key; breakpoint resume with the help of the auxiliary
key
Up
Suspend processing; up direction key
ESC
Stop processing; cancellation of various selections, inputs
and operations
Shift
Auxiliary key; switching between stepping mode and jog
mode under machining page
Down
Down direction key
OK
Entering jog/rapid jog speed adjustment page under menu
page; confirmation of various selections, inputs and
operations
 Function Information of Combination Key
The usage of combination key: press the auxiliary key first, and then the second; release the two keys
simultaneously after the corresponding function is called. See Table 3 for function of combination key.