Need help?Do you have a question about the WEIHONG NK105 G2F and is the answer not in the manual?
General| Brand | WEIHONG |
|---|---|
| Model | NK105 G2F |
| Category | Control Systems |
| Language | English |
Provides an overview of the manual's purpose, structure, and intended audience.
Lists the specific CNC system models for which this manual is applicable.
Provides contact information for technical support and sales services.
Details the fundamental components and setup of the NK105G2F/G3F system, including handheld and control boxes.
Explains the function and layout of the NK105G2 and NK105G3 operation panels and their keys.
Describes the NK105 four axes control box, including its terminals and interfaces.
Presents dimensional drawings for the NK105G2F/G3F control box and NK105 handheld box.
Explains binary input signals, their connection methods, and requirements for external circuits.
Details the open collector output ports on the control box and their maximum output current.
Defines differential signals used for driver motion control and their pulse command format.
Describes the SVC controllable voltage output (0-10V) for inverter frequency and spindle speed control.
Covers the different operation modes (Auto, Manual) and states (IDLE, ESTOP, Running, Pause, LOCK) of the CNC system.
Explains Machine Coordinate System (MCS) and Workpiece Coordinate System (WCS) and their conventions.
Details spindle speed gears, spindle stop settings, and adjustment methods.
Describes the manual speed settings, including high and low speed options.
Introduces the menu page structure, parameter items, and navigation for system configuration.
Outlines the initial system interface and prompts after powering on the CNC system.
Explains how to confirm and adjust the positive direction of each axis using the right-hand rule and parameters.
Details the process of setting pulse equivalent for linear and rotary axes to optimize precision and speed.
Describes how to set machine stroke and valid motion ranges for axes to prevent limit overrun.
Explains how to adjust the polarity of input/output ports in the software based on switch type.
Covers the necessity and procedure of homing axes before operations like soft limit and tool change.
Describes manual manipulation of the machine tool using direction keys and parameter adjustments.
Explains processing system and flash drive files for automatic machining, including file loading.
Details adjustments like feedrate override, spindle speed, and handling of machining pauses and e-stops.
Provides steps for updating the system software using a USB flash drive.
Explains the process of updating the system image (NK105.nb0) and software application.
Lists and defines system parameters related to velocity, machining, offset, spindle, and file operations.
Details driver parameters and provides wiring diagrams for various servo drive models.
Outlines the terms and conditions for using, copying, and transferring the software product.
States Weihong Company's ownership of intellectual property rights for the software product.
Defines the warranty period and terms for defects in materials and workmanship of the software carrier.
Specifies the extent of Weihong Company's liability regarding the software product's use and performance.
To Next Page
