WEIHONG NK105 G2F - Terminals on Control Box When General Software Is Installed

Specialized Concentrated Focused
Summarization「9」
Fig. 1-5 NK105 four axes control box
1.3.1. Terminals on Control Box When General Software Is
Installed
The detailed explanation of terminal pin signals is as shown in Table 6 and Table 7.
Table 6 Output signals
Silk-printed name
Corresponding signal
Remark
GY01(ZD-)
Negative differential signal of
Z-axis direction
ZD+ and ZD- are differential pair signals of
Z-axis direction.