Weiser Aura - Halo Touch

©2020 Spectrum Brands, Inc.
66451 Rev 01
14 / 14
Technical Support
1-800-501-9471
www.weiserlock.com
1. Open the Weiser app with your phone in Bluetooth range (30ft) and with Bluetooth turned on.
2. Select the icon.
3. Select the icon.
4. Enter Name.
5. Select Schedule Type then click Submit.
6. Follow the instructions on the app to enroll your ngerprint.
a. Make sure that the ngers are dry.
b. Adjust the nger to cover the sensor with the middle portion of the nger, especially when enrolling a child’s nger.
c. Make sure to lift the nger after each successful ngerprint scan until the app shows 100% enrollment.
NOTE: If you are unable to enroll a specic ngerprint because of ngerprint damage, dry skin, etc.,
please use a different nger.
A
How do I enroll a fingerprint for the lock?
If your registered ngerprints are unable to unlock the door, you will need to delete the existing
ngerprints and re-enroll the ngerprint into the lock. NOTE: If you are unable to enroll a specic
ngerprint because of ngerprint damage, dry skin, etc., please use a different nger.
1. Select the icon.
2. Select the Name of the person whose ngerprints you need to delete.
3. Tap the icon next to the registered ngerprints to delete them.
4. Select Schedule Type then click Submit.
5. Follow the instructions on the app to enroll your ngerprint.
a. Make sure that the ngers are dry.
b. Adjust the nger to cover the sensor with the middle portion of the nger, especially
when enrolling a child’s nger.
c. Make sure to lift the nger after each successful ngerprint scan until the app shows
100% enrollment.
B
My registered fingerprints are unable to unlock the door.
Halo Touch
10