Weiser Kevo Convert - Kevo Convert; Installation and User Guide; 1. Make sure your existing deadbolt is compatible.; 2. Measure the thickness of your door.

Kevo Convert
Installation and User Guide
1. Make sure your existing deadbolt is compatible.
If you have a standard deadbolt mounted separately from the handle below it, it is compatible with
Kevo Convert.
2. Measure the thickness of your door.
Measure to confirm that your door is either 35 mm or 44 mm (1-3/8″ or 1-3/4″) thick.
3. Disassemble your existing deadbolt.
A. Make sure your door is open and extend your latch bolt.