How to Perform the Door Handing Process
THE LEADER IN RESIDENTIAL SECURITY 213826 10/17
2
Make sure the door is open and the latch is extended.
Install 4 AA batteries in battery pack.
1
4
Insert the battery pack and continue holding the Lock button.
3
Press and hold the Lock button. Do not release.
5
The latch bolt will retract and extend to learn the locking and unlocking direction
of the door. Status LED will indicate success or failure.
Success: LED flashes green
Failure: LED remains solid red
Programming Video: https://www.youtube.com/watch?v=WZSMIYoiuhM&t=49s
To Next Page
