Weiser Smartcode 10 Installation And User Guide

A
N or P
(2x)
N P
S
Q R
A
B
B
If drilling a new door, use the supplied template and the complete
door drilling instructions available at www.weiserlock.com/doorprep.
Note: Additional door preparation may be
required for doors with 38 mm (1 1/2 in) holes.
Consult the deadbolt drilling instructions at
www.weiserlock.com/doorprep.
or
backset
Measure to conirm that the hole in
the door is either 54 mm (2 1/8 in) or
38 mm (1 1/2 in).
Measure to conirm that the backset is
either 60 or 70 mm (2 3/8 or 2 3/4 in).
60 or 70 mm
2 3/8 or 2 3/4 in
35 – 51 mm
1 3/8 – 2 in
Measure to conirm that the hole in
the door edge is 25 mm (1 in).
Measure to conirm that the door is
between 35 mm and 51 mm (1 3/8
and 2 in) thick.
A
A D
B C D
Is the door edge chiselled? Which latch are you installing?
54 mm
2 1/8 in
38 mm
1 1/2 in
25 mm
1 in
YES NO
Use latch “A.” If the
latch bolt is not already
extended, extend the
latch bolt as shown.
wood
block
actual
size
Use latch “B.” If the
latch bolt is not already
extended, extend the
latch bolt as shown.
Latch “A” Latch “B”
S (2x)
C
Q or R (2x)
Longer screws
install closest to
the door jamb.
door frame
E
Install strike on the door frame.
Make sure the hole in the door frame is drilled a
minimum of 25 mm (1 in) deep.
or
chiselled
not
chiselled
or
1
Prepare the door and check dimensions
2
Install the latch and strike
A
B
A
B
B
C
Is the D-shaped hole centred in the door hole?
Hold the latch in front of the door hole, with the latch
face lush against the door edge.
YES NO
No adjustment is required.
Proceed to next step.
D-shaped hole D-shaped hole
Rotate latch face as
shown to extend latch.
or
1 / 4
ENGLISH
66080001 Rev 01
GED2150
ZWave® Plus
Installation and User Guide
Required tools
Ruler
Hammer Wood block
Phillips head screwdriver
Additional Tools (depending on application)
Weiser
Technical Support
1-800-501-9471
www.weiserlock.com
Latch
Strike
C
Keys
E
Exterior Touchscreen
Adapter
Ring
D
Mounting
Plate
Parts in the box
Fasteners
48654 64109
T
V
49191
U
Contemporary
Interior Assembly
SmartKey
Tool
H
Traditional
M
M
Traditional
F F
Contemporary
G
03809
N
P
SL03031011
Q
R
S
A
B
Batteries
J
K L

Weiser Smartcode 10 Specifications

General

Keypad	Yes
Keyless Entry	Yes
SmartKey Security	Yes
Battery	4 AA Batteries
Finish Options	Satin Nickel, Venetian Bronze, Polished Brass
Connectivity	No
ANSI Grade	Grade 2
Backup Key	Yes
Weather Resistant	Yes
Auto-Lock	Yes
Warranty	Limited lifetime mechanical and finish
Lock Type	Electronic Deadbolt