WEISS DAC501-4ch - Page 22

Weiss Enginering Ltd. DAC501-4ch/DAC502-4ch
Available Colours: Silver, Black
Digital Inputs
• (1) XLR connector
• (1) RCA connector
• (1) TOSLINK connector (optical)
• (1) USB type B connector
• (1) RJ45 Ethernet connector
→ All inputs accept professional or consumer standard, i.e. accept AES/EBU or S/PDIF signals.
Sampling frequencies
• AES/EBU and S/PDIF inputs:
– 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz
• USB and RJ45 Ethernet inputs:
– 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz, 352.8 kHz, 384 kHz, DSD64, DSD128
• Toslink input:
– 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
Input word-length: max. 24 / 32 Bits
Digital Outputs: None
Analog Outputs
• (2) XLR connectors (hot on pin 2), short circuit proof output circuitry, DC coupled, low output impedance
• (2) RCA connectors, short circuit proof output circuitry, DC coupled, low output impedance
• (1) 6.3mm Jack socket for headphones, DC coupled, low output impedance
• DAC502-4ch only: (1) 4 pin XLR socket for headphones, DC coupled, low output impedance
The output level is selectable via the LCD menu or the web interface; four settings are provided as shown
below:
XLR Output
• 0dB setting: 7.957 V
rms
+20.3 dBu
• -10dB setting: 2.52 V
rms
+10.3 dBu
• -20dB setting: 0.797 V
rms
0.3 dBu
• -30dB setting: 0.252 V
rms
-9.7 dBu
→ As input a 0 dBFS sine wave signal was used
→ These levels are achieved with a 0.0 dB setting for the level control on the LCD screen.
RCA Output:
User Manual and 20 White Papers