WAS.handling Electro Documentation 36
4.5 Windows User Interface - Software
The parameterization of the software running on the Slot PLC has to be done using the Windows Software
‘WAS.Handling’. For doing this, a connection between PC and PLC via RS232 or ethernet has to be
established. For connecting via RS232, there is a so called “Null Modem Cable” necessary. The assignment
can be found in the electric manual.
This parameterization is only necessary one time after the implementation of the HP140. All important
parameters are placed to disposal via Interface to customers PLC.
For further Information please read the manual ‘WAS.handling Windows-Program’
To Next Page
Loading...
