WEISS TC 320 - User Manual

Rundschalttische TC
Rotary Indexing Tables TC
Betriebsanleitung
Operating Instructions

WEISS TC 320 Specifications

General

Type	Temperature Controller
Control Algorithm	PID, On/Off
Input	Thermocouple, RTD, Analog
Output	Relay, SSR, Analog
Display	LED
Power Supply	100-240 VAC, 50/60 Hz or 24 VDC
Communication	RS-485

Summary

Safety Instructions

Intended Use

Specifies the intended use of the indexer and adherence to instructions.

Safety Regulations

Mandates careful reading of the manual and system compliance before operation.

Description of the Index Tables

Drive

Magnetic Brake

Control of the Index Table

Function in general

Describes the general principle of controlling the drive with brake motor.

Control with the Controller Card TS 002 E

Details the operation and fault messages of the TS 002 E control card.

Controlling with the Controller Card EF-xxx

Explains controlling the indexer using the EF-xxx controller and frequency inverter.

Control Sequence with PLC

Outlines the control sequence when using an external PLC.

Control, Drive Motor and Brake Wiring

Provides wiring diagrams for normal and reciprocating operation.

Start-Up

Safety Regulations

Electrical Preparations

General Start-Up

Maintenance

Adjustment of Brake on Brake-Motor

Replace Brake

Replace motor

Troubleshooting

Troubleshooting Control Card TS 002 E

Lists common faults for TS 002 E card and their rectification.

Troubleshooting the Control Card EF xxx

Details error messages and reset procedures for EF xxx control card.