WEISS TR1100A User Manual

ROTARY INDEXING RING
TR0750A / TR1100A / TR1500A / TR2200A
MOUNTING INSTRUCTIONS
TD0026A-EN00-0000-00 062019_4.0_EN
CUSTOMER:
ORDER:
ROTARY INDEXING RING
TR0750A / TR1100A / TR1500A / TR2200A
MOUNTING INSTRUCTIONS
TD0026A-EN00-0000-00 062019_4.0_EN
CUSTOMER:
ORDER:

WEISS TR1100A Specifications

General

Type	Temperature and Humidity Transmitter
Input	Temperature and Humidity
Power Supply	24 VDC
Accuracy (Temperature)	±0.3°C
Accuracy (Humidity)	±2% RH
Protection Rating	IP65
Sensor Type (Humidity)	Capacitive
Output	4-20 mA
Humidity Range	0 to 100% RH

Summary

Introduction

About these mounting instructions

Explains the purpose and use of the mounting instructions.

Intended use

Defines the product's intended application and limitations.

Predictable incorrect application

Lists impermissible uses and conditions for the product.

Applicable documents

Lists documents binding for the product's use.

Warranty

Provides information on product warranty and terms.

Product description

Overview

Describes the components of the rotary indexing ring with diagrams.

Function description

Explains how the product moves payloads via cycled rotary movements and its mechanism.

Nameplate

Details the information found on the product's nameplate.

Type code

Explains the structure and meaning of the product's type code.

Mounting positions

Specifies the permissible standard mounting positions for the product.

Drive positions

Illustrates the different possible positions for the drive housing.

Passage of media

Describes how media can be passed through the inner opening of the product.

Technical data

General

Provides general technical specifications and parameters for the product.

Motor

Lists technical data related to the motor specifications.

Holding brake

Details technical specifications for the holding brake.

Inductive sensor

Provides technical data for the inductive sensor.

DRIVE-CLIQ encoder (optional)

Technical specifications for the optional DRIVE-CLIQ encoder.

Climatic environmental conditions "Operation"

Specifies environmental conditions for product operation.

Climatic environmental conditions "Transportation and Storage"

Specifies environmental conditions for transportation and storage.

Dimensions

Presents dimensional drawings and specifications for various product models.

Load data

Details load capacities and data for the output flange.

Packaging

Types of packaging

Describes the different types of packaging used for the product.

Unpacking the product

Instructions on how to unpack the product safely.

Verification of the delivery

Steps to verify the product delivery for completeness and damage.

Transportation

Transporting the product

Details methods for transporting the product, including safety.

Load lifting and handling equipment

Specifies requirements for safe load lifting and handling equipment.

Fastening the load lifting and handling equipment

Instructions on how to fasten lifting equipment to the product.

Storage

Storing the product

Outlines conditions for storing the product to maintain its integrity.

Mounting

Prerequisites for mounting

Lists requirements and checks before starting product mounting.

Equipment and tools

Lists necessary tools and equipment for mounting the product.

Tightening torques and property classes

Specifies screw property classes and tightening torques for fastening.

Bolting down the product

Instructions for securely bolting the product to its mounting surface.

Displacing the drive housing

Details how to reposition the drive housing for different mounting configurations.

Mounting additional components

Guidance on attaching extra components to the product.

Mounting safety equipment

Requirements for safety equipment installation with the product.

Electrical connection

Connection diagram supply voltage

Wiring diagram for connecting the motor and holding brake power supply.

Controller

Basic information on control

Explains the basic principles of controlling the product's rotary movements.

External controller (PLC)

Details considerations for using an external PLC for product control.

Commissioning

Prerequisites for commissioning

Lists all requirements that must be met before the product can be commissioned.

Performing commissioning

Step-by-step guide for commissioning the product after installation.

Operation

Basic information on operation

General information and safety precautions for operating the product.

Troubleshooting

Issue, cause and remedy

Table listing common issues, their causes, and solutions.

Cleaning

Performing cleaning

Instructions and safety precautions for cleaning the product.

Maintenance

Maintenance plan

Outlines the schedule and activities for regular product maintenance.

Lubricant

Provides information regarding product lubrication.

Replacing the motor

Step-by-step guide for safely replacing the motor.

Inspecting the toothed belt

Procedures for inspecting the toothed belt for wear or damage.

Replacing the toothed belt

Instructions for safely replacing the toothed belt.

Inspecting the holding brake

Guidance on inspecting the holding brake for proper function.

Readjusting the air gap of the holding brake

Steps to adjust the air gap of the holding brake for optimal performance.

Replacing the holding brake

Detailed instructions for replacing the holding brake unit.

Replacing the inductive sensor

Procedure for replacing the inductive sensor.

Decommissioning

Decommissioning the product

Instructions for safely decommissioning the product.

Dismounting

Dismounting the product

Steps for safely dismounting the product from its installation.

Disposal

Disposing of the product

Guidance on proper disposal of the product and its components.

Service and spare parts

Worldwide service

Contact information and required details for worldwide service support.

Ordering spare parts

Information and required details for ordering spare parts.