2. Safety
Page 12 104781 - MRF-2 | MRH-2 - V2.4 - 22.07.2020
These operating instructions contain important technical and safety in-
formation. Please read carefully before installation and before any work
on or with the regulator.
It is the duty of the party commissioning the system to ensure compli-
ance with the following guidelines.
The PID multichannel temperature controller may only be installed by
an authorised specialist, observing all local safety requirements.
Access to the environment when connected must be restricted to spe-
cialised personnel.
PID multichannel temperature controllers contain live components.
They must be built into the plant in such a way that contact with such
live components is impossible.
Precise technical data can be found in the accompanying documenta-
tionor on the stickers affixed to the controller.
The controller is not suitable for use in explosive atmospheres. Danger
of explosion. Use only outside areas subject to explosive atmospheres.
The device must not be used if the housing or connection terminals are
damaged.
No fluids must penetrate the housing.
To Next Page
Loading...
Need help?
General