1. Introduction
Page 8 104781 - MRF-2 | MRH-2 - V2.4 - 22.07.2020
1.5 Items supplied
- Controller MRF-2 | MRH-2
- Holder
- Rubber seal
- Fixing screws
- Accompanying documentation
- Software “WELBA-KONSOFT” (optional)
1.6 Disposal
For the purposes of disposal, the device is classified as waste electronic equipment
within the meaning of European Directive 2002/96/EC (WEEE) and must not be in-
cluded with household waste. It must be disposed of through the correct channels.
Local and current legislation must be observed.
1.7 Cleaning instructions
The enclosure front (front foil) can be cleaned with usual detergents.
ATTENTION: The enclosure front is not resistant to aggressive acids
and alkalis, abrasive cleaners and cleaning with high-pressure
cleaners!
The use of these cleaners and cleaning methods may lead to damages!
To Next Page
Loading...
Need help?
General