1. Introduction
104781 - MRF-2 | MRH-2 - V2.4 - 22.07.2020 Page 5
1.2 Limitation of liability
The proper function of the WTS-300 depends on many external factors
on which the manufacturer has no influence. The manufacturer
assumes no liability for damage to connected components or
downstream process components.
All information and instructions in this manual have been compiled taking into ac-
count the applicable standards and regulations, the state of the art and our long-term
experiences.
WELBA GmbH does not assume any liability for damages due to:
- Non-observance of the installation instruction
- Improper use
- Installation by unqualified staff
- Non-professional installation by third parties
- Unauthorized modifications
- Technical modifications
Otherwise, our general terms and conditions as well as the terms of delivery of
WELBA GmbH and the legal regulations valid at the time of conclusion of the
contract are applicable.
We reserve the right to make technical changes in the context of improving the pro-
perties of use and further developments,
To Next Page
Loading...
Need help?
General