28 Part Number STH098 06/19
Touch Pad Operation
Pressing and holding the clean button for 3 seconds starts
the cycle. The Clean & On/Off lights energize indicating the
cycle has started and ice making will automatically start
when the cycle is complete.
• Setting the ice machine to stop after the cycle:
Press the On/Off button. The On/Off light will de-
energize indicating the ice machine will stop after the
cycle.
• Pausing the cycle: Press the Clean button. The clean
light will flash indicating the cycle has paused. Pressing
the Clean button again will restart the cycle.
Step 1 Press the On/Off button after ice falls from the
evaporator at the end of a Harvest cycle. Or, press the On/
Off button and allow the ice to melt off the evaporator.
,
Caution
Never use anything to force ice from the evaporator.
Damage may result.
Step 2 Remove all ice from the bin.
n
Warning
Wear rubber gloves and safety goggles (and/or face
shield) when handling Ice Machine Cleaner/Descaler
or Sanitizer.
To Next Page
Loading...
Need help?
General