EasyManuals Logo

Welbilt Manitowoc NEO UDP0080A User Manual

Welbilt Manitowoc NEO UDP0080A
180 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #42 background imageLoading...
Page #42 background image
42 Part Number STH098 06/19
Detailed Descaling and Sanitizing Procedure
UDP0080
Ice machine cleaner/descaler is used to remove lime scale
and mineral deposits. Ice machine sanitizer disinfects and
removes algae and slime.
Step 1 Move the toggle switch to Off after ice falls
from the evaporator at the end of a Harvest cycle. Or, set
the toggle switch to Off and allow the ice to melt off the
evaporator.
,
Caution
Never use anything to force ice from the evaporator.
Damage may result.
Step 2 Remove all ice from the bin.
n
Warning
Wear rubber gloves and safety goggles (and/or face
shield) when handling Ice Machine Cleaner/Descaler
or Sanitizer.
,
Caution
Do not mix Ice Machine Cleaner/Descaler (9405463)
and Sanitizer (9405653) solutions together. It is a
violation of Federal law to use these solutions in a
manner inconsistent with their labeling.
Step 3 To start a cycle move the toggle switch to Wash.
Step 4 Wait until water flows over the evaporator
(about three minutes) then add the proper amount of
Manitowoc Ice Machine Cleaner/Descaler to the water
trough.
Model Amount of Cleaner/Descaler
Part Number 9405463
UDP0080 1.5 ounces (45 ml)

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Welbilt Manitowoc NEO UDP0080A and is the answer not in the manual?

Welbilt Manitowoc NEO UDP0080A Specifications

General IconGeneral
BrandWelbilt
ModelManitowoc NEO UDP0080A
CategoryIce Maker
LanguageEnglish

Related product manuals