30 Part Number STH098 06/19
Step 5 Mix a solution of cleaner/descaler and warm
water. Depending on the amount of mineral buildup, a
larger quantity of solution may be required. Use the ratio
in the table below to mix enough solution to thoroughly
descale all parts.
Solution Type Water Mixed with
Cleaner/Descaler 1 gal. (4 l) 16 oz (500 ml)
cleaner/descaler
part number 9405463
,
Caution
Do not immerse electrical connectors or motors for
any components in water, cleaner/descaler or sanitizer
solutions.
Use half of the cleaner/descaler and water solution to
descale all components. The solution will foam when it
contacts lime scale and mineral deposits; once the foaming
stops use a soft bristle brush, sponge or cloth (not a wire
brush) to carefully descale the parts. Soak the parts for 5
minutes (15 – 20 minutes for heavily scaled parts). Rinse all
components with clean water.
Step 6 While components are soaking, use half of
the cleaner/descaler and water solution to descale all
foodzone surfaces of the ice machine and bin. Use a nylon
brush or cloth to thoroughly descale the following ice
machine areas:
• Evaporator plastic parts – including top, bottom and
sides
• Bin bottom, sides and top
• Rinse all areas thoroughly with clean water.
To Next Page
Loading...
Need help?
General