Welch Allyn Home - Troubleshooting Blood Pressure Monitor Error Messages; Addressing Specific Error Codes and Symptoms

40 Welch Allyn Home Blood Pressure Monitor
Low
batteries
The display
indicates
the “BAT-
LO”
message,
pauses for
3 seconds.
The battery
icon shows
empty
(does not
flash.)
Batteries are
low.
Replace
with new
batteries
Error
messages
E 01 shows The cuff is
not secure
Readjust
the cuff,
relax for a
moment,
and then
measure
again
E 03 shows There is too
much
pressure in
the cuff
Refasten
the cuff
and then
measure
again
E 10 or E 11
shows
The monitor
detected
motion while
measuring
Readjust
the cuff,
relax for a
moment,
and then
measure
again
Problem Symptom Root
cause
Solution