Welch Allyn PRO ECG Recorder - 4. Technical Specifications; Safety, EMC, and Regulatory Compliance; Equipment Disposal Guidelines

CardioPerfect
PRO ECG Recorder - User Manual
DIR 80012763 Ver. H 21 / 25
4. Technical Specifications
Table 2 CardioPerfect PRO Cardiograph
PRO CARDIOGRAPH
SPECIFICATION
SE-PRO-600
Signal bandwidth
Sampling Rate
0.05 to 150Hz
600 samples/sec
SE-PRO-1200
Signal bandwidth
Sampling Rate
0.05 to 250Hz
1200 samples/sec
Internal Sampling Rate
9600Hz
Pacemaker Bandwidth
2KHz
Amplitude Quantization
3.75 µV
Skew
72.9 µSec
Input impedance
>5M Ω
Gain accuracy
5% RTI
DC dynamic span
±300 mV (95% gain accuracy)
AC dynamic span
±5mV
CMMR
83 dB
Recovery time after defibrillation
80% gain accuracy after 5s
Setup time after power-on
80% gain accuracy after 5s (all leads connected)
Power consumption
<750mW
Enclosure protection against ingress of water
None - IPX0
Degree of protection against electrical shock
CF
Mode of operation
Continuous
Storage and transport temperatures
-20° to +50° C (-4° to +122° F)
Operating temperature
+10° to +40° C (+50° to +104° F)
Relative humidity
15 to 90% non-condensing
Operating altitude
-170 to +4877 m (-557 to +16000 ft)
Safety, EMC, and regulatory compliance
Complies with ANSI/AAMI EC11 and multi-country versions of:
IEC 60601-1, 60601-1-2, 60601-1-6, 60601-2-25, 62304, 62366.
Medical Device Directive
The CardioPerfect PRO cardiograph complies with the requirements of the Medical Device
Directive 93/42/EEC and carries the 0297 mark accordingly.
Declaration of Conformity available upon request.
Discarding the Equipment
Dispose of this product and its accessories according to local regulations. Do not
dispose of as unsorted municipal waste. For more specific disposal or compliance
information, go to www.welchallyn.com/weee or contact Welch Allyn Technical
Support at www.welchallyn.com/about/company/locations.htm.