First time selection of Wi-Fi connectivity
workflow
Note The Wi-Fi camera setup only needs to be
completed once unless a change to the
connectivity workflow is desired.
1. Touch RetinaVue Network - Wi-Fi to select the wireless workflow and touch
Next.
2. From the list of available networks, touch on the Wi-Fi connection that you
want to connect to.
Note *Wi-Fi network names shown here are examples.
Note If you don't see the desired Wi-Fi network that you want
to connect to, you may need to scroll down.
Directions for use First time set up of the RetinaVue 700 Imager 31
To Next Page
Loading...