• Approach the patient from directly in front of the examined eyes and
firmly press the face cup against the patient's forehead and nose.
• Ask the patient to focus on the fixation light.
Note For additional information about techniques to
capture the highest quality image, see the
Technique guide that came with the RetinaVue 700
Imager.
1. Press the power button.
Note To conserve power, the RetinaVue 700 Imager enters
Sleep mode if it remains idle for the time set during set
up. (Sleep mode settings include 2, 5, 7, 10 minutes,
and Never). Touch the LCD screen or press the power
button to wake up the RetinaVue 700 Imager from Sleep
mode.
Note Unless Never is selected, the RetinaVue 700 Imager
powers down after 10 minutes of inactivity in Sleep
mode. Press the power button to activate the RetinaVue
700 Imager. (See the Settings sections for information
about changing the Sleep mode settings.)
2. From the Patients screen, touch
to create a new patient.
48 Using the RetinaVue 700 Imager Welch Allyn RetinaVue™ 700 Imager
To Next Page
Loading...