To Next PageTo Next PageWhat to do if Welch Allyn Medical Equipment shows 'Temperature time limit exceeded'?
If your Welch Allyn Medical Equipment indicates that the temperature time limit has been exceeded, remove the probe from the patient.
What to do if my Welch Allyn Spot Vital Signs LXi displays 'Cannot read the device’s Error Log'?
If your Welch Allyn Medical Equipment cannot read the device's Error Log, this problem will correct itself.
What to do if Welch Allyn Medical Equipment is unable to release cuff pressure?
If the Welch Allyn Medical Equipment is unable to release cuff pressure, check the tubing for any kinks and ensure all connections are secure.
How to fix air leak in Welch Allyn Spot Vital Signs LXi?
If the Welch Allyn Medical Equipment displays an air leak, check the blood pressure cuff and tubing connections to ensure they are properly connected.
What to do if my Welch Allyn Spot Vital Signs LXi displays 'SpO time limit exceeded'?
If your Welch Allyn Medical Equipment indicates that the SpO time limit has been exceeded, remove the sensor from the patient.
What to do if my Welch Allyn Spot Vital Signs LXi Medical Equipment displays 'Internal SpO error'?
If your Welch Allyn Medical Equipment displays an internal SpO error, retake the reading.
What happens if cuff pressure duration exceeded on Welch Allyn Spot Vital Signs LXi Medical Equipment?
If the Welch Allyn Medical Equipment exceeds cuff pressure duration, the device will power down.
What to do if my Welch Allyn Medical Equipment displays 'Internal malfunction'?
If your Welch Allyn Medical Equipment displays an internal malfunction, contact Technical Service for assistance.
What to do if Welch Allyn Medical Equipment shows probe heater error?
If the Welch Allyn Medical Equipment displays probe heater error, retake the reading. If the problem persists, replace the probe.
How to fix broken thermometer probe on Welch Allyn Spot Vital Signs LXi?
If the Welch Allyn Medical Equipment displays a broken thermometer probe, replace the probe.
General| Display Type | LCD |
|---|---|
| Blood Pressure Measurement Method | Oscillometric |
| NIBP Technology | Oscillometric |
| MAP Calculation | Yes |
| Battery Type | Rechargeable Lithium-Ion |
| Device Type | Vital Signs Monitor |
| Brand | Welch Allyn |
| Model | Spot Vital Signs LXi |
| Measurements | Blood Pressure, Pulse Rate, SpO2, Temperature |
| Pulse Rate Range | 30 bpm |
| Blood Pressure Range | Systolic: 60-250 mmHg |
| Power Source | AC Power, Rechargeable Battery |
| Wireless Connectivity | Bluetooth |
| Memory | Up to 50 |
| Battery Life | Approximately 8 hours |
| Connectivity | USB |
