.
2 © Weldclass 2019 | E.&O.E. | Edition 1.0 2019.05
Congratulations & thank you for choosing CutForce!
The CutForce range from Weldclass provides market leading value, features and durability. CutForce
machines have been designed with emphasis on robust construction, with simple and functional operation.
Register Your Warranty Now
Standard warranty without registration is 24 months.
To qualify for an extended full 36 month warranty on your purchase you must register within 30 days of
purchase.
Please register your warranty now by going to:
www.weldclass.com.au/weldforcewarranty
You will need;
a) A copy of your purchase invoice / receipt.
b) Your machine serial number which can be found on the technical data plate on the back of the
machine, or on the outside of the box that your machine came in.
Highly Recommended Accessory:
Dry and clean compressed air is extremely critical for successful plasma cutting. Any humidity (moisture) or
particle (dirt/dust) content in the compressed air supply will; increase the likelihood of torch & machine
malfunction, accelerate parts consumption and affect cutting capacity/performance.
The air regulator/filter supplied with the CF-45P machine provides the minimum level of filtration.
However, we strongly recommend the WELDCLASS PLATINUM Z-20 high-performance air filter, available as
an optional accessory from your Weldclass distributor. This attaches to the inlet of the existing
regulator/filter and provides excellent filtration down to 1-micron.
Increases torch parts life &
reduces consumable costs
Improves cutting performance
Self-draining
Long-life filter cartridge
(<6 months)
Part No: WC-06255
Available from your Weldclass distributor
To Next Page
Loading...
