Welger E-LINK RP 235 - 5 Monitor Menu

10 WELGER RP 235 • E-LINK
5 "Monitor" menu
The MONITOR
MONITORMONITOR
MONITOR menu is the standard menu. This menu
is used for daily machine operation.
The
MONITOR
MONITORMONITOR
MONITOR menu appears automatically as soon
as the control is supplied with power.
 Open menu overview: press key .
 Select MONITOR
MONITORMONITOR
MONITOR menu: keys or
 Confirm selection with key .
The following information are displayed in the menu
MONITOR
MONITORMONITOR
MONITOR:
Central main field
• Machine status ( baling, tying, ...)
• Bale diameter with presetting
• Cutting device status
Beside the main field
• Actual daily counter
• Machine working time
• Battery voltage
• PTO speed
Below the main field
• Tying mode
• Hydraulic switch (cutting device, bottom door, pick-up)
• Operating parameter (bale diameter, net layers)