Welger E-LINK RP 235 - Monitor Display Information

WELGER RP 235 • E-LINK 11
5.1 The display
Tying mode
(see page 12)
Hydraulic switch
(see page 13)
Operating parameter
(see page 16)
manual
twine tying
Adjustment
pick-up
Bale density
(here: set value 5)
automatic twine tying Adjustment
bottom door
Net layers
(here: set value 1.5)
Manual net tying
Adjustment cutting device
(here: 8 knives selected)
Automatic net tying
automatic
combined tying
The PTO speed regulates the optional electric Lubrication pump and the measurement of the machine
working time. Both will be activated at a PTO speed larger than 100 rpm.
A
nimation:
Material flow into the bale
r
Bale counter
(
active dail
y
counter
)
Machine
working time
(active daily counter)
Bar chart
for representation of the bale
density with display of the set
value (arrow)
Battery voltage
PTO speed