WELGER RP 235 • E-LINK 25
8 "Diagnosis" menu
The control contains extensive diagnostic routines for checking the function the electric equipment.
There are two diagnostic routines:
Standard diagnosis (see chapter 8.1 Standard diagnosis)
Diagnostic functions with machine stopped. Machine
functions completely switched off. In addition, a fully
automatic actor test is possible.
Extended diagnosis (see chapter 8.2 Extended diagnosis)
Diagnostic functions while machine is in operation.
Observation of all sensor channels and actor channels
possible. Selection via special key combination.
Attention, danger of injury!
Extended diagnosis is executed while the machine is
running. For trained and instructed service personnel
only!
To Next Page
Loading...