CMP100 User Guide
20
CR-DVBC/DTMB -00 >Service Configuration
In Descrambling Settings there are CAM1, CAM2, No Descrambling options. Click Apply or Clear
Config button in the right side to make the change take effect or clear all configuration.
CR-DVBC/DTMB -00 >System Operation
In System Operation page you can change into DVBC Mode or DTMB Mode, Restart module,
Factory Reset, and Log Export.
4.1.2 CR-DVBS2CI
CR-S2CI is a 4-channel DVB-S/S2 receiving and descrambling module with 2 RF connectors and 2
CI slots, each RF connector with 2 transponders receiving.
To Next Page
Loading...
