2
Specifications (Continued)
Model
No.
1300 (100) R-410A / 41.27(1170)
Setting temperature (Room cool mode)
F( C)
Model
No.
Application Area (Room cool mode)
ft²(m²)
Refrigerant
Type / oz(g)
450 / 250
Design Pressure - Hi/Low
Psig
882 / 776
(1499 / 1318)
4 / 102mm 16 (400) 60 (18)
Model
No.
Wheels
pcs / diameter
Hot Air Duct Diameter
In.(mm)
Maximum Duct Length
ft(m)
Indoor Air Flow (High/Low)
CFM(CMH)
64~86 (18~30) 32~86 (0~30)
Please read this manual carefully for instructions on correct installation and usage. Please read all safeguards.
1. Transport and store the unit in an upright position only. Leave unit in an upright position for at least 3 hours
before first use.
2. Always place the unit on an even, level surface.
3. Ensure the unit is connected to a grounded power supply of the correct rating / capacity.
4. The unit will cool when the room temperature is between 18°C (64.4°F) ~ 45°C(113°F) depending on
the thermostat setting.
5. DO NOT use this unit for functions other than those described in this instruction manual.
6. DO NOT tilt the unit.
7. DO NOT cover or obstruct the unit's inlet and outlet grilles.
8. DO NOT use the unit in areas where it will be exposed to rain or water.
9. NEVER unplug the unit while it is operating.
DO NOT use the unit in wet environments, such as a laundry room, to avoid
the risk of electrical shock.
General Safety Information
Setting temperature ((Spot cool mode)
F( C)
Safety Devices
Compressor overload protector, Anti-freezing thermister, Full drain tank switch,
Automatic restart (Power interruption), Compressor time delay program,
High pressure switch
Features
Temperature control, Self-diagnostic function, Two speed fan, Optional drain
pump kit, Washable filters, display, Off-timer
F( C)
Model WPC-9000Owner’s manual
WPC-9000
WPC-9000
WPC-9000
To Next Page
Loading...
Need help?
General
