WeMacro Rail User Manual

1
Quick installation guide of WeMacro Rail
PARTS LIST
1,shutter extension cable; 2,control box; 3,1/4 inch screw; 4,stepper motor cable; 5,the
rail; 6,adapter(depending on customer choose); 7,shutter cables(depending on customer choose);
8,USB cable
STEPS:
1, Install the camera on the rail by using 1/4 inch screw.
2, Install the rail on a tripod by using the screw hole in the rail bottom. There are 4 kinds of holes in
bottom, 1/4 inch screw holes, 3/8 inch screw hole, 6.5 mm diameter and 10 mm diameter hole. Each
kind of hole has four positions.
3, Connect the shutter extension cable to the control box, shutter cable connect to camera. Then
connect these two cable

WeMacro Rail Specifications

General

Brand	WeMacro
Model	Rail
Category	Camera Accessories
Language	English

Summary

Installation Steps

Install Camera on Rail

Install the camera on the rail using the 1/4 inch screw.

Mount Rail on Tripod

Mount the rail on a tripod using the screw hole in the rail bottom with various hole types.

Connect Cables

Connect the shutter extension cable to the control box and the shutter cable to the camera.

Software Guide

Windows Software Setup

Install the driver (ch341ser.exe) and run the wemacro.exe for Windows system.

Mac OS Control

Control the rail using Mac OS via USB or Bluetooth 4.0.

iOS and Android Control

Control the rail using iOS via Bluetooth or Android via OTG or Bluetooth.

Operating Modes

Distance Mode

Input total distance and step length; program calculates total steps.

Start to End Mode

Set starting and ending positions and step length for automatic rail movement.

Settings and Tips

Notes on Settings

Explanation of shutter waiting time, settle time, and specific cable needs for Canon.

Bluetooth Connection Guide

Instructions for connecting Android and iOS devices via Bluetooth.

Rail Setting Tips

Guidance on fixing the rail, choosing modes, using ring support, and camera mounting.