1. Air Filtration System .................................................. 1
(with Inner and Outer Filters Installed)
2. Mounting Hangers .................................................... 4
3. Mounting Brackets .................................................... 4
4. Hex Wrenches ........................................................... 2
5. Rubber Feet ............................................................... 4
6. Remote Control ......................................................... 1
7. AAA Batteries ............................................................ 2
8. Instruction Manual .................................................... 1
UNPACKING
With the help of a friend or trustworthy foe, such as one of your in-laws, carefully remove the air filtration system
from the packaging and place it on a sturdy, flat surface. Make sure to take out all contents and accessories. Do not
discard the packaging until everything is removed. Check the packing list below to make sure you have all of the
parts and accessories. If any part is missing or broken, please contact customer service at 1-800-232-1195 (M-F
8-5 CST), or email techsupport@wenproducts.com.
UNPACKING & PACKING LIST
PACKING LIST
1. M6 X 4.8 Bolts .......................................................... 8
2. M6 Flat Washers ....................................................... 8
3. M6 Lock Washers ..................................................... 8
HARDWARE BAG (1)
WARNING! Foam blocks are installed around the motor inside the cabinet for shipping. The foam must be
removed before operation. Take off the outer and inner air filter from the back of the unit and remove the foam
blocks around the impeller (See “Remove the Foam Blocks”).
KNOW YOUR AIR FILTRATION SYSTEM
Filter Lock Clip
Mounting Hangers
Outer Filter
Carrying Handle
Mounting Brackets
Control Panel
Fuse
Power Cord
Remote Control
NOT SHOWN
Inner Filter
(Installed on the inside of the machine)
8
To Next Page
Loading...
Need help?
General
