Wen AF1270 - User Manual

Questions and Answers

C
Carolyn FoxJul 29, 2025
What to do if my Wen Water Filtration System unit will not turn on using the remote?
- Z
  zcarterJul 29, 2025
  If your Wen Water Filtration System unit isn't turning on with the remote, there are several things you can check: * Ensure the unit is plugged in. * Make sure you are pointing the remote directly at the unit and are within range. * Replace the remote batteries (AAA). * Check the fuse and replace it if necessary (part no. 3416-057, 6x30mm, F8AL250V).
W
William PrattAug 3, 2025
What to do if my Wen Water Filtration System keeps blowing fuses?
- L
  Lisa MossAug 3, 2025
  If your Wen Water Filtration System is repeatedly blowing fuses, consider the following: 1. The filters may be dirty or clogged. Try cleaning or replacing them. 2. There might be an issue with the line power circuit. Try running the unit on a different circuit.
C
Courtney HayesAug 8, 2025
What to do if my Wen Water Filtration System unit will not turn on using the control panel?
- D
  david32Aug 8, 2025
  If your Wen Water Filtration System unit isn't turning on via the control panel, first, ensure the unit is properly plugged in. If it's plugged in, check the fuse and replace it if needed (part no. 3416-057, 6x30mm, F8AL250V).
J
Jeffrey WaltersAug 13, 2025
Why is the airflow insufficient in my Wen Water Filtration System?
- M
  Maria WelchAug 13, 2025
  If the airflow from your Wen Water Filtration System is insufficient, it could be due to a couple of reasons. The filters might be dirty or clogged, in which case you should clean or replace them. Alternatively, the unit may not be optimally positioned, so try re-positioning it.
J
Jason PerezAug 18, 2025
Why doesn't the timer function work on my Wen Water Filtration System?
- B
  baueramberAug 18, 2025
  If the timer function isn't working on your Wen Water Filtration System, remember that the timer function must be set using the remote. Also, ensure that you are pointing the remote at the unit and are within range.
M
Ms. Tiffany PriceAug 22, 2025
How to fix speed control function if it does not work on my Wen Water Filtration Systems?
- C
  Christina Edwards MDAug 22, 2025
  If the speed control function isn't working on your Wen Water Filtration System, make sure that you are pointing the remote at the unit and are within range.

Summary

General Safety Rules

Electrical Safety

Precautions related to electrical hazards and proper use of power cords.

Personal Safety

Measures for personal protection and safe operation practices.

Air Filtration System Safety Warnings

Operation

Turning On;Off and Setting the Speed

Instructions for powering the unit on/off and adjusting fan speed.

Maintenance

Changing the Filters

Steps for inspecting and replacing the inner and outer air filters.

The WEN AF1270 Industrial-Strength Air Filtration System is designed to circulate and filter wood and other non-metallic dust, providing a cleaner and safer work environment. This system is engineered for dependability, ease of operation, and operator safety, offering years of rugged, trouble-free performance when properly cared for and used as intended.

Function Description

The air filtration system works by drawing in shop air, filtering out dust and small particles through a two-stage filtration process, and then releasing cleaner air back into the environment. It helps to reduce airborne contaminants that can damage the human respiratory system and create a healthier workspace. The unit can be operated via a control panel or a remote control, offering flexibility in managing its functions.

Important Technical Specifications

Model Number: AF1270
Motor: 120V, 60 Hz, 4.2A
Max Airflow:
- High Speed: 1270 CFM (Cubic Feet per Minute)
- Medium Speed: 950 CFM
- Low Speed: 750 CFM
Air Filters:
- Inner Filter: 1 Micron (Model 3415AF1)
- Outer Filter: 5 Microns (Model 3415AF5)
Noise Rating: 63 - 68 dBA
Max Remote Control Distance: 26 Feet
Fuse: F8AL250V, 6mm x 30mm
Product Weight: 55 Pounds
Product Dimensions: 30.3 in. x 24 in. x 12.2 in.

Usage Features

The WEN AF1270 offers several features to enhance its usability and performance:

Dual Control Options: The system can be turned on/off and its speed adjusted either directly from the control panel on the unit or remotely using the included remote control. This provides convenience, especially when the unit is ceiling-mounted.
Three Speed Settings: Users can select between low (LO), medium (MID), and high (HI) speeds to match the filtration needs of their workspace. LED lights on the control panel indicate the currently selected speed.
Programmable Timer: The remote control allows users to set a timer for 1, 2, or 4 hours, after which the unit will automatically shut off. This feature is useful for maintaining air quality even after work has concluded or for specific time-bound tasks. The timer can also be cleared, allowing the unit to run continuously until manually turned off.
Mounting Flexibility: The unit can be placed on a flat surface using its adhesive rubber feet (recommended if not ceiling-mounted) or mounted to the ceiling. For ceiling mounting, two methods are available:
- Mounting Hangers (Eyebolts): These allow the unit to be hung from the ceiling using wood screws and chains (not included).
- Mounting Brackets: These enable direct attachment to ceiling joists using wood screws (not included).
Optimal Placement Guidelines: For best airflow performance and safety, the unit should be mounted at least 7 feet above the floor and at least 3 feet (1 meter) away from any corners or heating, cooling, or air circulation vents. It must be anchored to building structures capable of holding at least 100 lbs, avoiding non-structural components like drywall or false ceiling grids.
Shipping Protection: The unit includes foam blocks around the motor for protection during shipping. These blocks must be removed before operation to prevent damage and ensure proper function. This involves removing the outer and inner air filters and unscrewing the inner grating to access the impeller area.

Maintenance Features

Regular maintenance is crucial for the longevity and efficient operation of the WEN AF1270:

Filter Replacement: The system utilizes two filters: a 1-micron inner filter (Model 3415AF1) and a 5-micron outer filter (Model 3415AF5). These filters should be checked periodically based on usage and shop environment and replaced when clogged. Clogged filters can reduce airflow and potentially overload the unit. Replacement filters are readily available.
Easy Filter Access: Filters are accessed by lifting the filter lock clips on the back of the unit, allowing for straightforward removal and installation. The airflow indicator label on the outer filter ensures correct orientation.
Fuse Replacement: In the event of a short circuit, the unit is protected by a fuse. If the fuse blows, it can be replaced by turning the fuse cap counterclockwise, pulling out the old fuse, inserting a new F8AL250V (8 amps, 6x30mm) fuse, and tightening the cap. If the fuse continues to blow on a different circuit, it indicates a potential internal problem requiring professional assistance.
Remote Battery Replacement: The remote control uses two AAA batteries, which can be easily replaced by opening the battery compartment.

The WEN AF1270 is designed to be a robust and user-friendly air filtration solution, emphasizing safety, performance, and ease of maintenance to provide a consistently clean working environment.