F
Felicia MillerAug 14, 2025
Why doesn't my Wen DG4500iX support all connected electrical devices?
- Rricky73Aug 14, 2025
If your WEN Portable Generator runs but doesn't support all connected devices: * The AC or DC receptacles may be overloaded, causing the circuit breaker to trip. Turn off and unplug all electrical devices, wait 3 minutes, then press the breaker to reset. Check the amperage of the devices to ensure they are within the receptacles’ rated capacities. * There might be a short circuit in one of the devices. Disconnect any faulty or short-circuited electrical devices. * The air filter may be dirty. Clean or replace the air filter element.