Wen DW6394 User Manual

ASSEMBLING THE DRYWALL SANDER
1. Attach the sandpaper (Fig. 2 - 1) of your choice to the face of
the hook and loop base pad (Fig. 2 - 2). Ensure the holes on the
sandpaper align with the holes on the bottom of the pad.
2. The use of a dust collection device is highly recommended.
Connect the dust hose (Fig. 3 - 1) to the bottom of the unit (Fig.
3 - 2) and then connect the other end of the dust hose directly to
your dust collection device (Fig. 3 - 3) or use one of the provided
dust port adapters depending on the port on your dust collection
device.
ASSEMBLY & ADJUSTMENTS
Fig. 2
1
2
Fig. 3
1
3
WARNING! To avoid injury from accidental startups,
turn switch OFF and remove the plug from the power source
outlet before making any adjustments.
2
9
TOOL PURPOSE
Sand plastered walls, ceilings, and interior walls, as well as remove paper residues, paint layers, coat-
ings, adhesive residues, and loose plaster with your WEN Drywall Sander. Refer to the diagram below
to become familiarized with the parts and controls of your drywall sander.
KNOW YOUR DRYWALL SANDER
Hose Connection
Hook & Loop Base Pad
Motor
Power Switch
Variable Speed
Handle

Wen DW6394 Specifications

General

Brand	Wen
Model	DW6394
Category	Sander
Language	English