To Next PageTo Next PageHow to fix Weslo Cadence 840 when the power does not turn on?
First, ensure the power cord is properly connected to both a surge suppressor and a grounded outlet. Next, verify that the key is fully inserted into the console. Finally, check the circuit breaker on the treadmill frame near the power cord. If needed, reset it by waiting five minutes before pressing the switch back in.
How to fix a Weslo Cadence 840 walking belt that is off-center or slips?
If the walking belt on your Weslo Treadmill has shifted to the left, remove the key and unplug the power cord. Then, use the allen wrench to turn the left rear roller adjustment bolt clockwise and the right bolt counterclockwise, 1/4 of a turn each. If the walking belt has shifted to the right, remove the key and unplug the power cord. Use the allen wrench to turn the left rear roller adjustment bolt counterclockwise and the right bolt clockwise, 1/4 of a turn each. If the walking belt slips when walked on, remove the key and unplug the power cord. Use the allen wrench to turn both rear roller adjustment bolts clockwise, 1/4 of a turn.
What to do if the Weslo Cadence 840 Treadmill console displays do not function properly?
If the displays on your Weslo Treadmill console aren't functioning correctly, the most common cause is drained batteries. Check the batteries in the console and replace them if necessary.
What to do if my Weslo Treadmill power turns off during use?
If your Weslo Treadmill turns off during use, check the circuit breaker located on the treadmill frame near the power cord. Also, ensure the power cord is securely plugged in. Finally, try removing and reinserting the key fully into the console.
Why does the Weslo Cadence 840 walking belt slow down when I walk on it?
First, ensure you're using a single-outlet surge suppressor that meets the required specifications. If the walking belt is overtightened, remove the key and unplug the power cord. Use the included allen wrench to turn both rear roller adjustment bolts counterclockwise, 1/4 of a turn. If the walking belt still slows when walked on, no answer.
Explains the walking belt's lubricant and care instructions, warning against other substances.
Details proper power connection, surge suppressor use, and grounding requirements for safety.
Illustrates and labels the treadmill's console components for user familiarization.
Provides step-by-step instructions for powering on, starting, and stopping the treadmill console.
Explains how to safely change the treadmill's incline level by using the incline pins.
Addresses issues with the treadmill not powering on, checking cord, key, and circuit breaker.
Discusses why the treadmill might shut off during operation, checking breaker and key insertion.
Explains how to fix console display issues, primarily by checking or replacing batteries.
Provides solutions for a slow walking belt, including checking surge suppressor and belt tension.
Details how to center a misaligned belt or tighten a slipping belt using roller adjustment bolts.
Explains how to set exercise intensity using heart rate zones for fat burning and aerobic goals.
Provides structure for workouts, including warm-up, training zone exercise, and cool-down.
Advises on how often to exercise for maintenance and improvement, suggesting rest days.
Demonstrates and describes five common stretching exercises for flexibility and injury prevention.
General