9
9. Make sure that all parts are properly tightened before you use the treadmill. Keep the included hex key in
a secure place. The hex key is used to adjust the walking belt (see page 18). To protect the floor or carpet,
place a mat under the treadmill.
8. Attach the Latch Assembly (48) to the Left
Handrail (53) with two Latch Screws (7). Make
s
ure that the Latch Assembly is oriented as
shown.
See HOW TO CHANGE THE INCLINE OF THE
TREADMILL on page 14, and insert the two
Incline Pins into the Incline Legs.
8
7
48
53
To Next Page
Loading...
Need help?
General