To Next PageTo Next PageHow to fix Weslo Cadence R 5.2 Treadmill power does not turn on?
If your Weslo Treadmill isn't turning on, ensure the power cord is connected to a surge suppressor, and the suppressor is plugged into a grounded outlet. Also, verify that the key is properly inserted into the console. Check the power switch on the treadmill frame; if it's tripped (protruding), wait five minutes, then press it back in to reset.
What to do if Weslo Cadence R 5.2 Treadmill power turns off during use?
If your Weslo Treadmill shuts off during use, check the power switch. Ensure the power cord is securely plugged in; if it is, unplug it, wait five minutes, then plug it back in. You can also try removing and reinserting the key from the console.
How to fix Weslo Cadence R 5.2 walking belt that is off-center?
If the walking belt on your Weslo Treadmill is off-center, and has shifted to the left, turn the left idler roller screw clockwise 1/2 of a turn using a hex key. If the belt has shifted to the right, turn the left idler roller screw counterclockwise 1/2 of a turn. If the walking belt slips, ensure it's tightened correctly; you should be able to lift each edge 2 to 3 inches off the platform.
Why Weslo Cadence R 5.2 Treadmill console display remains lit?
If the console displays on your Weslo Treadmill stay lit after removing the key, the demo mode may be active. To deactivate it, press and hold the Stop button for a few seconds.
General| Motor Power | 2.5 HP |
|---|---|
| Running Area | 16" x 50" |
| Speed | 0-10 MPH |
| Display | LCD |
| Programs | 6 Personal Trainer Workouts |
| Weight Capacity | 250 lbs |
| Foldable | Yes |
| Speed Range | 0-10 MPH |
| Heart Rate Monitoring | No |
| Incline | Manual |
| Motor | 2.5 HP |
| Incline Range | Manual |
Illustrates warning decal placement and provides instructions for replacement.
Covers user responsibilities, physician consultation, home use, environment, and safe operating practices.
Details surge suppressor use, cord connection, and safe operating practices.
Outlines safety rules for unattended use, moving the treadmill, and product maintenance.
Introduces the treadmill and identifies key components with a diagram.
Lists necessary tools and hardware for treadmill assembly.
Details attaching the base to the upright using screws.
Guides attaching handrails and connecting the console assembly.
Covers attaching the latch housing and ensuring all parts are tightened.
Explains how to properly connect the power cord using a surge suppressor for safety.
Describes the console's functions, displays, and features like the heart rate monitor.
Guides users on powering up, using manual mode, and starting workouts.
Explains how to select and perform exercises using the treadmill's preset programs.
Details how to use the information mode and change the treadmill's incline levels.
Provides instructions on how to safely fold and store the treadmill.
Details the steps and precautions for moving the folded treadmill.
Addresses problems like the treadmill not turning on or console display issues.
Solves problems related to the walking belt slowing, slipping, or being off-center.
Explains how to determine proper exercise intensity using heart rate zones.
Provides guidance on warming up, training duration, cooling down, and workout frequency.
Lists all parts of the treadmill with corresponding key numbers and quantities.
Visual representation of how parts connect during assembly across multiple views.
Details the information required when contacting customer service for replacement parts.
Outlines the terms, limitations, and registration requirements for the product warranty.
