1
1
FEATURES OF THE CONSOLE
The treadmill console offers a selection of features
designed to make your workouts more effective.
While the manual mode of the console is selected, the
speed of the treadmill can be changed with the touch
of a button. As you exercise, the displays will provide
continuous exercise feedback. You can even measure
your heart rate using the built-in pulse sensor.
The console also offers four speed programs. Each
program automatically controls the speed of the tread-
mill as it guides you through an effective workout.
Note: If there is a sheet of clear plastic on the con-
sole, peel off the plastic. To prevent damage to the
walking platform, always wear clean athletic shoes
while using the treadmill. During the first few min-
utes that the treadmill is used, inspect the align-
ment of the walking belt, and center the walking
belt if necessary (see page 18).
HOW TO TURN ON THE POWER
Plug in the power cord (see
page 10). Next, locate the
on/off switch on the treadmill
frame near the right upright.
Make sure that the switch is
in the “on” position.
Next, stand on the foot rails of the treadmill. Find the
clip attached to the key (see the drawing above), and
slide the clip onto the waistband of your clothes. Then,
insert the key into the console. After a moment, the
track and the three displays will light. Important: In an
emergency situation, the key can be pulled from
the console, causing the walking belt to slow to a
stop. Test the clip by carefully taking a few steps
backward; if the key is not pulled from the console,
adjust the position of the clip.
CONSOLE DIAGRAM
On
Position
Key
Clip
To Next Page
Loading...
Need help?
General