How to fix Weslo Crosswalk G 3.2 Treadmill if the power does not turn on?
First, ensure the power cord is correctly plugged into a surge suppressor, and that the surge suppressor is plugged into a grounded outlet. Also, verify that the key is properly inserted into the console. If the switch has tripped (protrudes), reset it by waiting five minutes, then press the switch back in. Finally, try removing and reinserting the key from the console.
What to do if Weslo Crosswalk G 3.2 Treadmill walking belt is off-center or slips?
If the walking belt is off-center or slips, first remove the key and unplug the power cord. For an off-center belt shifted to the left, use the hex key to turn the left idler roller screw clockwise 1/2 of a turn. If the belt slips, use the hex key to turn both idler roller screws clockwise 1/4 of a turn.
What to do if Weslo Crosswalk G 3.2 Treadmill walking belt slows down when walked on?
If the walking belt slows when walked on, and it is overtightened, remove the key and unplug the power cord. Use the hex key to turn both idler roller screws counterclockwise, 1/4 of a turn. Note that your treadmill features a walking belt coated with high-performance lubricant. If the belt continues to slow down when walked on, consult the front cover of this manual.
How to stop Weslo Crosswalk G 3.2 Treadmill upperbody arms squeaking during use?
To stop the upperbody arms from squeaking, turn the Resistance Knob (A) counterclockwise and remove it. Apply a thin layer of white marine grease to the outer surface of the Resistance Cone (B).
Shows the location of warning decals and how to obtain replacements.
Lists essential safety warnings and instructions before using the treadmill.
Introduces the treadmill and advises reading the manual before use.
Identifies small parts used for assembly with diagrams and key numbers.
Register the product and prepare all parts and tools for assembly.
Steps to attach the base to the uprights and connect the console assembly.
Instructions for attaching handrails and connecting the console wire harness.
Steps for securing the console, latch housing, and upper body arms.
Final checks for tightening all parts and preparing the treadmill for use.
Guide on properly connecting the power cord using a surge suppressor for safety.
Explains the console's functions, including manual mode and preset workouts.
Steps to power on the treadmill and operate it in manual mode.
Guide to selecting and using the treadmill's preset workout programs.
How to adjust the treadmill's incline and resistance of upper body arms.
Step-by-step guide on how to fold, move, and lower the treadmill.
Addresses issues related to the treadmill not powering on or console displays malfunctioning.
Resolving issues with the walking belt slowing down or slipping.
Solutions for squeaking sounds and proper walking belt tension adjustment.
Guidance on determining exercise intensity, target zones, and workout planning.
Demonstrates basic stretches for hamstrings, calves, quadriceps, and inner thighs.
A comprehensive list of all parts for the treadmill with key numbers and quantities.
Information on how to order replacement parts for the treadmill.
Details the warranty coverage, terms, and conditions for the treadmill.
General| Motor Power | 2.0 HP |
|---|---|
| Maximum Speed | 10 mph |
| Running Area | 16" x 50" |
| Weight Capacity | 250 lbs |
| Display | LCD |
| Foldable | Yes |
| Speed Range | 0 - 10 mph |
| Incline | Manual |
| Heart Rate Monitoring | Pulse sensors |
To Next Page
