Westcott FJ200 Strobe - FJ200 Advanced Functions; Continuous Capture; Settings Menu Navigation

To Next Page

To Previous Page

FJ200 Strobe: SYNC Functions

Enabling ‘Normal’ Sync

Ideal in every day scenarios when color consistency (5500K ±150), full-power output (200 Ws), and the

fastest recycling are essential.

1. Quick press the center Control Dial once to enter the Settings menu.

2. Rotate the Control Dial until SYNC is selected with the thin white box.

3. Once selected, quickly press the Control Knob until the thin white box turns blue.

4. Rotate the Control Dial until NOR sync is selected.

5. Engage NOR sync by quickly pressing the Control Dial or by pressing the Return | Model button

once.

6. Rotate the Control Dial to make further changes in the Settings menu or press the Return |

Model again to return to the main control screen.

NOTE: Utilize HSS (see below) when choosing to use shutter speeds above your camera's maximum

normal sync speed (typically: 1/200s, 1/250s, or 1/320s ).

Enabling ‘HSS (High-speed Sync)’

Ideal for mixing a substantial amount of available light and ﬂash when proper exposure with a shallow

depth of ﬁeld/wide aperture requires a ﬂash sync speed above the camera’s maximum normal sync

speed (typically: 1/200s, 1/250s, or 1/320s). HSS allows compatible cameras to achieve ﬂash sync speed

up to 1/8000s.

1. Quick press the center Control Dial once to enter the Settings menu.

2. Rotate the Control Dial until SYNC is selected with the thin box.

3. Once selected, quickly press the Control Knob until the thin white box turns blue.

4. Rotate the Control Dial until HSS sync is selected.

5. Engage HSS sync by quickly pressing the center Control Dial or by pressing the Return | Model

button once.

6. Rotate the Control Dial to make further changes in the Settings menu or press the Return |

Model again to return to the main control screen.

NOTE: HSS requires FJ2-Xm Wireless Trigger or FJ80 Universal Speedlight for proper operation and

performance.

Enabling ‘Freeze Sync’

Ideal for freezing fast-moving objects lit by the strobe. [Available in Manual mode Only.]

1. Quick press the center Control Dial once to enter the Settings menu.