Contents
Contents 1
Introduction 3
Components (Included) 4
Important things to know before starting… 4
Reviewing Firmware Files 4
TTL ±3 Flash Exposure Compensation 4
Canon Continuous Mode 4
Flashes Per Charge 4
FJ200 Strobe: Body Overview 5
FJ200 Strobe: Control Panel Overview 5
FJ200 Strobe: LCD Display & Menus 6
FJ200 Strobe: Warnings 7
FJ200 Strobe: Firmware Updates 8
Installing the Firmware 8
FJ200 Strobe: Getting Started 9
Charging the FJ200 Lithium Polymer Battery 9
Reinserting the FJ200 Lithium Polymer Battery 9
DC Power Operation 9
AC Power Operation 10
FJ200 Strobe: Mounting 10
Mounting to a Light Stand 10
FJ200 Strobe: Attaching & Removing Modifiers 10
Connecting the FJ200 Metal Reflector & Compatible Modifiers 10
Removing the FJ200 Metal Reflector & Modifiers 11
Attaching an Umbrella-Based Modifier 11
Removing an Umbrella Based Modifier 11
FJ200 Strobe: FJ Wireless Communication 11
FJ200 Strobe: Exposure Modes 12
Enabling ‘TTL’ Mode Operation 12
Enabling ‘Manual’ Mode Operation 12
FJ200 Strobe: SYNC Functions 13
Enabling ‘Normal’ Sync 13
Enabling ‘HSS (High-speed Sync)’ 13
To Next Page
Loading...