26
Press or to choose ON or OFF. After confirmation, press
and the following picture occurs. Push or to choose
save confirmation or save cancellation. After choosing confirmation, press
again. So the modified parameters will be saved or cancelled. When it is cancelled, the
inverse cursor moves back to the main menu interface.
When save confirmation chosen, the indication of successful saving will occur as follows.
After parameters successfully saved, it returns to main menu interface.
▼ Light control interface
Press or to choose load control mode. When the inverse cursor
rests on Light On / off in the load control interface, press to enter light
control interface which displays the following contents.
To Next Page
