27
When press or , the inverse cursor moves among every
parameters. When is continuously pressed, it moves back to main menu
interface and press or to modify every parameters. Only when
the inverse cursor rests on option of light control off delay, can modification of the
parameters be saved. When modification is confirmed, press , and the
following picture appears. Press or to choose save confirmation
or save cancellation. After choosing confirmation,
press again, and the modified parameter can be saved or cancelled. When
save cancellation is chosen, the inverse cursor moves back to the main menu interface.
When save confirmation chosen, the indication of successful saving will occur as follows.
After parameters successfully saved, it returns to main menu interface.
To Next Page
