Need help?Do you have a question about the Westinghouse Halley and is the answer not in the manual?
General| Type | Ceiling Fan |
|---|---|
| Blade Span | 52 inches |
| Number of Blades | 5 |
| Remote Control | Yes |
| Brand | Westinghouse |
| Reversible Motor | Yes |
| Finish | Brushed Nickel |
| Motor Type | AC |
| Motor Speed | 3 |
Key safety instructions and warnings for installation and operation.
List of tools necessary for the installation and assembly process.
Unpack and inspect fan carefully to ensure all contents are included. Turn off power at fuse box.
Use suitable outlet box securely fastened to ceiling member for fan support.
Remove screws from mating holes and loosen screws in mating slots on the canopy.
Rotate the mounting bracket to detach it from the canopy for installation.
Install mounting bracket to outlet box in ceiling using provided screws and washers.
Secure receiver bracket to mounting bracket and insert receiver into receiver bracket.
Install the included light bulbs into the light fixture.
Align glass indentations with light kit protrusions and twist clockwise to lock.
Install two AAA 1.5V batteries into the hand-held smart remote transmitter.
Procedure to re-pair the smart remote transmitter and receiver if pairing fails.
Explanation of fan speed settings and forward/reverse slide switch for cooling and heating.
Periodic checks, cleaning methods, and lubrication requirements for the fan.
Check fuses, wiring connections, and reverse switch if the fan does not start.
Check screws, use appropriate controls, and allow break-in period for fan noise.
Ensure blades and mounting are secure, and interchange blades if wobble persists.
Check light bulbs and wire connections in the switch housing for light issues.
To Next Page