52
Machine control board, Software
704 67 020 00 _ 111
GF Robimat XL / XM
OPERATING INSTRUCTIONS
[ESCROW AUTOM.] Refers to change given in coins
[on] Requirement: [CHANGE + MULTI] or [NO CHANGE + MULTI] is set in [VEND MODE].
Change is automatically dispensed (without pressing the refund button) as soon as the credit
is lower than the amount set under [max. RETURN].
[o] (default) The function is deactivated.
[HAPPY HOUR]
[on] If you set [HAPPY HOUR] to [on], various selections can be sold at a dierent price during a
specied time.
The cash price and the happy-hour price are entered in the [PROGRAMMING MODE] menu
M1. The happy-hour time and the selections it applies to are set in the [PROG. TIME/LOCKS]
menu [M6].
[o] (default) The function is deactivated.
[PRESEL. TIME]
[in sec.] During the time specied it is possible to make a selection before inserting coins. The
selection remains until money is inserted. If 0 is set, money must rst of all be inserted, then
a selection made so that a vend can take place.
[CLEAR CREDIT]
[after.] (in sec.)
180 s (default)
0 s (remaining amount
is not deleted]
This function enables an additional waiting time to be entered whilst non-returnable change
is still displayed, before it is nally deleted.
This might be required for contactless card payment systems, where the card is debited
with the amount and it only turns out afterwards that the product requested cannot be
dispensed. The time entered here gives the customer the option of reversing the amount by
re-presenting his contactless card to the machine.
[CHANGE BLOCKED]
from 255 coins [CHANGE BLOCKED] can be set to prevent the vending machine from being used as a
coin changer. The limit for changing can be set from 0 to 255 coins, where only the number
of coins inserted are counted and not their value. Even if the [VEND MODE] is set to "no
change", the machine will give change until the lowest sales price has been reached.
[EXEC VEND
RETRY]
STATUS CMDS This value denes the number of retries for sales requests if the EXEC-changer does not
respond.
[CASH SALE]
MDB 42 (default) The Cash Sale command operates according to the MDB 4.2 version.
[MDB 41] This Cash Sale command is used specically and requires special knowledge in MDB
programming.
[CORRECT
CHANGE]
automatic (default) [CORRECT CHANGE] is shown in the display if there are insucient or no coins available.
never The [CORRECT CHANGE] indicator is inhibited. This setting is necessary if it is not possible
to give change
To Next Page
Loading...
