5
General
704 67 020 00 _ 111
OPERATING INSTRUCTIONSGF Robimat XL / XM
© SIELAFF GmbH & Co. KG Automatenbau
This documentation is protected by copyright. No parts of this manual may be used or reproduced or amended in any
manner whatsoever without written permission from the Copyright Holder. The company reserves all rights, especially
for translation, re-print, using charts and pictures, broadcasting, photo-mechanic or other reproduction and storage in
data-processing systems. This also applies to extracts.
SIELAFF does not accept responsibility in respect of the contents of this operating manual and cannot be held liable for
any claims made based on information not contained therein.
In addition SIELAFF reserves the right to update this publication and make changes to it, without being obliged to inform
any person of these changes.
The texts, pictures and data in these Operating Instructions reect the technical status of the machine at the time of
printing. We reserve the right to make changes in order to develop the machine further.
This document consists of 76 pages.
If all the pages are in consecutive order, your document is complete.
Please note that these operating instructions apply to dierent vending machine variants. For this reason some of the
information may not apply to your vending machine.
is described in this document. If another version is installed on your machine, there
may be some dierences.
Enter service code [21L] to read out the software version installed.
In order to ensure safe use of the machine, the operating instructions must always be accessible to the operator.
These should be easily accessible for referral at all times.
This manual should under no circumstances be placed on the machine oor underneath the lift. Air ow would be
restricted, resulting in damage to the chiller unit.
Registered users can also download this document from our website at www.siela.de/download-center .
Payment systems such as coin mechanisms, banknote readers or cashless payment systems can be tted to this
machine.
We would like to point out that special accessories may be required and special settings may need changing in the
machine software in order to ensure error-free operation of the payment system being used. Please refer to additional
third-part documentation from the relevant manufacturer (operating manual, tting instructions etc.).
To Next Page
Loading...
