6
General
704 67 020 00 _ 111
GF Robimat XL / XM
OPERATING INSTRUCTIONS
Robimat is a machine for vending cooled drinks in cans, PET and glass bottles. The drinks do not fall into the dispense
outlet but are transported using a lift system. This means that fragile products can also be vended.
Specications for the products that are suitable for vending are listed in "Product Specications" chapt. 2.3 of these
operating instructions.
A two-line (LCD) display provides selection and system information.
All machine functions are managed and checked via a microprocessor module. Sales and error data is stored on the
machine control board.
The selection keypad is also used for programming the vending machine control board during servicing.
The vending machine is prepared for operation with a coin mechanism as standard.
As an option the Robimat is also available in a High Security version.
If malfunctions should occur which you cannot remedy yourself, our Customer Service Department will be pleased to
help. Please have the model, machine number and software version to hand.
This information is absolutely essential for warranty claims.
The identication plate is located inside the cabinet- on the top right hand side - and is visible once the sliding door unit
has been pulled out.
SIELAFF GmbH & Co. KG Automatenbau
Münchener Straße 20
D - 91567 Herrieden
Telephone: +49 9825 18-0 Switchboard
+49 9825 18-31 51 02 Service-Hotline
Telefax: +49 9825 18-31 54 99 Service
+49 9825 18-31 52 99 Spare parts ordering
Email: export@siela.de
www: www.siela.com
Please note that these operating instructions cover dierent machine versions. For this reason some of the information
may not apply to your vending machine.
GF Robimat XL ........... 704 00 000 00
GF Robimat XL-EC ........ 704 00 000 10
GF Robimat XL-EW ........ 704 00 000 20
GF Robimat XM ........... 706 00 000 00
GF Robimat XM-EC ........ 706 00 000 10
To Next Page
Loading...
